مبدل ⁦SSD⁩ ساتا ۲.۵ اینچی آبل‌کان ⁦Ableconn⁩ مدل ⁦ISAT-M2MS⁩، تبدیل ⁦mSATA⁩ یا ⁦M.2 NGFF SATA⁩ به درایو ۲.۵ اینچ ۷ میلی‌متری ⁦SATA⁩، با براکت فریم آلومینیومی

معرفی

The Ableconn ISAT-M2SR turns two M.2 SATA SSD modules into an 2.5-inch SATA III SSD drive with RAID to increase performance and redundancy. The drive metal frame and mounting holes enable you to install it like a 2.5" internal hard drive. It supports SATA based M.2 NGFF 80/60/42/30 mm SSD. Specification * Connector: - 1 x SATA Data & Power (7+15 pins) Receptale - 2 x M.2 NGFF slots (type 2280-D5- B socket on board) * Chipset: ASMedia ASM1092R * Data transfer rate: - Up to 6 GBps (SATA III) * Jumper Selection: - 1 x jumper for RAID Mode setting * Software: - OS independent; No driver installation is required on Windows, Mac, and Linux. - Provides Windows and Mac GUI to configure RAID modes and monitor RAID status. * Convert 2x M.2 NGFF SATA based SSD to a standard 2.5" 7mm SATA drive * Supports SATA I, SATA II, SATA III Host port. * Support SATA hot plug and booting. * Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260, 2242 and 2230 SATA-based SSD * Supports dual-sided SSD module 1.5mm component height on the top and bottom side * Supports H/W RAID 0, RAID 1, SPAN (Big Drive) and PM (2Drives) Modes. Note: the SATA Host required to be Port Multiplier capable for PM Mode. The SMART function is not supported. * Hardware Jumper and Windows & Mac software GUI configure RAID modes * 2x LED indicators for M.2 accessing activity or device failure * Includes 7mm height 2.5-inch drive metal frame with 8 mounting holes and 4 HDD screws * Dimensions (LxWxH): 4 x 2.8 x 0.2 in / 100 x 70 x 7 mm * Fully RoHS compliant. * Made in Taiwan Note: NVMe M.2 SSD modules can NOT work with this SATA Based Adapter. Package Contents * Ableconn ISAT-M2SR 2.5-inch SATA Adapter for Dual M.2 SATA SSD with RAID * 4x drive mounting screws