تقویت‌کننده سیگنال وای‌فای دو بانده ⁦SUNHANS 4000mW 36dBm⁩، ۲.۴ و ۵.⁦8G⁩، ⁦IEEE 802.11/a/n/b/g⁩، مناسب ⁦UAV⁩، تقویت‌کننده بی‌سیم

معرفی

Notes: The aluminum alloy casing adopts CNC to resist interference; its good heat dissipation function allows you to worry about the performance of the equipment without worrying about the heat generated during use. Its superior shielding function fully protects the health of you and your family. Features: 2.4 &5.8 G , Max. 4000mW output power; Aluminum-alloy case by CNC, anti-interference; For house, office, UAV, IP cameras, RC equipment.... Technical Specifications: Booster model: SHPro5824G4W Operating range : 2.4~2.5 ; 5.0~5.8 G Channel width: 20Mhz&40Mhz&80Mhz Supported standards: IEEE 802.11b/g/n/a Operation mode: Bi-directional, half-duplex, time division duplex Connector type: N-K female Output power: 4000mW (36dBm) Input power: 0 ~ 20dBm Transmit gain: 16 ~ 19dB Receiver gain: 10dB Noise figure: ≤3.5dB typical Frequency response: ±1dB over operating range Power adapter: 12V/2A DC, 100~240V Operating temperature: -20°Cto +70°C Operating humidity: Up to 75% relative humidity Material: Cast aluminum LED light: Power status LED and activity status LED Booster size: 130mm x 77mm x 24mm Booster weight: 318g Package included: 1 x SHPro5824G4W WiFi booster 1 x power supply 1 x user manual Instructions on use: 1. Remove the antenna from the wireless device first. 2. Take out the SMA/N cable and connect the wireless device to the TO Radio port of the signal amplifier. 3. Connect the antenna to the other end of the signal amplifier (TO Antenna). 4. Plug in the power and it's done.