FEIFANZHE Walnut SAS to USB3.0 Adapter 2.5 or 3.5 inch SSD/HDD External SAS Hard Drive Docking Station Adapter Enclosure for RPM SAS 6/12Gbps Enterprise Hard-FSASM1

معرفی

2.5 '/ 3.5' SAS HDD SSD hard disk enclosure sled Read and write online, connect the data cable of the hard disk copier to the computer, and check the hard disk drive in the computer - disk management - view (the new hard disk needs to be formatted for the first time, and the old hard disk should be backed up before use) Supported hard disk: 2.5 '/ 3.5' SAS (6gbps / 12gbps) HDD SSD Product size: 175 * 102 * 33mm Transmission bandwidth: Type-C 5Gbps Product wiring: Type-C to USB3.0 Cable Product power supply: 12v2a Supported system: Windows / OS MAC / Linux / Android Product material: Walnut Product weight: 160g (bare metal), 260g (including packaging) Product indicator: blue Installation mode 1. Insert the SSD straight into the product interface. 2. Install the necessary screws. FAQ / Note: 1. It supports SAS HDD/SSD only. NOT Compatible with SATA HDD/SSD. 2. After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normall (yand the old hard disk needs to be backed up before use). 3.Warm Note - If you computer can't recognize the SSD enclosure. Please Following Steps,Right click 'Computer' - 'Manage' - 'Disk Management'. For new SSD, Find your unallocated disk,right click 'Unallocated', and choose 'New Simple Volume Wizard'.(Please pay attention to the backup data of the old hard disk)